HI-E DRY 195 Installation, Operation and Maintenance Instructions 1-877-420-1330 5 www.QuestProtect.com salesQuestProtect.com 2.1A In Humid Area, No Ducting The simplest installation is to place the HI-E Dry 195 in the humid area with no ducting. The air inlet on top & outlet on, HI-E DRY 195 Installation, Operation and Maintenance Instructions 6 sales@QuestProtect.com u est 2.3 Condensate Removal The HI-E Dry 195 is equipped with an internal condensate pump to remove the water that is condensed during dehumidification.This allows the condensate to be pumped 20’ with the attached hose. If the, Quest Hi-E Dry 195 Get the flexibility you need in an economical package with the HI-E DRY 195 . The HI-E DRY 195 was designed for areas demanding higher capacity equipment to help eliminate mold, mildew and their odors, such as indoor pools, spas, locker rooms and exercise areas.
where the HI-E Dry 95 is located. Second, to accurately sense humidity, the blower in the HI-E Dry 95 may need to run continuously to draw air from the humid room into the HI-E Dry 95 room. Third, a slight negative pressure is created in the room with the HI-E Dry 95, which could back draft, open combustion devices located there. If, HI-E Dry 195 Manuals & User Guides. User Manuals , Guides and Specifications for your HI-E Dry 195 Dehumidifier . Database contains 1 HI-E Dry 195 Manuals (available for free online viewing or downloading in PDF): Installation, operation and maintenance instructions .
Quest HI-E Dry dehumidifiers are designed for plug-and-play or ducted installations. The HI-E DRY 195 ( 195 pints of water removal per day) was designed for areas with heavier moisture loads that demand higher capacity equipment to help eliminate mold, mildew and their odors, such as indoor pools, spas, locker rooms and exercise areas.
The HI-E DRY 195 high efficiency dehumidifier is designed and built with emphasis on efficiency and durability. The HI-E DRY 195 removes 183 pints of water per day at a rate of 5.9 pints per kilowatt hour in an 80°F and 60% RH environment, while the industry average remains at only two to three pints.
The HI-E DRY 195 high efficiency dehumidifier is designed and built with emphasis on efficiency and durability. The HI-E DRY 195 removes 183 pints of water per day at a rate of 5.9 pints per kilowatt hour in an 80°F and 60% RH environment, while the industry average remains at only two to three pints.
The HI-E DRY 195 plugs into a 115 volt 15 amp outlet, and provides all the humidity control necessary for a 440 square foot pool. (82°F Air Temp.
80°F Water Temp. 60% Relative Humidity) Low Operating Cost. HI-E DRY dehumidifiers remove two to three times more water per kilowatt hour of electricity than conventional dehumidifiers .
Quest Hi-E Dry 120 Dehumidifier Quest Hi-E Dry 120 Dehumidifier Removes 120 pints/day (80°F, 60% AHAM) 6.62 pints/KWH efficiency (70°F, 60% RH) 7.7 pints/KWH efficiency (80°F, 60% RH) Hi-E DRY 120 dehumidifiers are designed and built with emphasis on efficiency and durability. Today’s Hi-E DRY 120 dehumidifiers remove up to 7.7 pints of …
